AccuteX
Wire EDM - AU Series / Non-Submersed Models - Flush Type)
SP-300iA & SP-300iE
| SP-300iA and SP-300iE: Specifications | |
| Table Travel (X & Y Axis) | 13.8" x 9.8" |
| Z Axis Travel | 8.7" |
| U & V Axis Travel | 3.15" x 3.15" |
| Table Feed Rate | 0 - 51.1 IPM |
| Maximum Taper Angle | |
| Standard AWT | ± 23° |
| Optional | ± 45° |
| Maximum Workpiece Size (X,Y,Z) | 30.1" x 21.1" x 8.5" |
| Granite Base Table | N/A |
| Maximum Workpiece Weight | 1,150 lbs. |
| Automatic Wire Thread System | Standard |
| Wire Diameter | 0.004" - 0.014" |
| Wire Feed Rate | 0 - 590 IPM |
| Wire Tension | 300 - 2,200 grams |
| Start Hole Size | .020" |
| Maximum Wire Spool Weight | 35 lbs. (opt. 100 lbs.) |
| Heidenhain Linear Glass Scales .000004" Resolution | Standard (not available on SP-300iE) |
| Positioning Accuracy | +/- .0001" |
| Machine Weight | 5,525 lbs. |
| Dielectric Tank | |
| Tank Capacity | 135 gallons |
| Paper Filter (Cartridge Type) (Quantity) | 3 |
| Deionized (Resin Tank) 1 Cubic Feet | Standard |
| Cooling Unit (Chiller) | Standard |
| Power Supply | |
| Discharge Power Circuit | AC MOSFET Standard |
| Application Specific Integrated Circuit | ASIC Standard |
| Anti-Electrolysis Power Supply | Standard |
| Intelligent OV Circuit | Standard |
| Modular PC Board Design | Standard |
| SD Master | Standard |
| Micro Sparking Technology MST II | Standard on SP-300iA, not available on SP-300iE |
| Input Power Supply | |
| V | 220 V +/- 5%, 3 Phase, 60 HZ |
| KVA | 20 |
| CNC Control | |
| Control Device | 64 - Bit Windows CE Based IPC |
| Screen Display | 15" Color TFT Touch Screen |
| Memory Capacity | 128 MB SD RAM |
| Controlled Axis | |
| Standard | X, Y, Z, U, V (5 Axis Simultaneous) |
| Optional | 6th Axis Simultaneous: X, Y, Z, U, V, Plus W Axis |
| Least Input Increment | 0.000004" |
| Least Command Increment | 0.000004" |
| Input/Output Interface | Keyboard, RS-232c, Ethernet, USB Ports (2) |
| Servo Control System | Full-Closed Loop |
| Interpolation | Linear, Circular |
| Maximum Programmable Dimension | ± 999.99999" |
| Command Unit | Inch/Metric Switchable |
| Scaling | 0 to 9.9999 times |
| Figure Rotation | ± 360° |
| Mirror Image | Independent X and Y Axis |
| Wire Diameter Compensation | 0 - ± 9.99999" |
| Automatic Coordinate System Skewing Calculation | |
| *Specifications subject to change without notice | |
SP-500i
| SP-500i: Specifications | |
| Table Travel (X & Y Axis) | 19.7" x 11.8" |
| Z Axis Travel | 11.8" |
| U & V Axis Travel | 3.9" x 3.9" |
| Table Feed Rate | 0 - 51.1 IPM |
| Maximum Taper Angle | |
| Standard AWT | ± 23° |
| Optional | ± 45° |
| Maximum Workpiece Size (X,Y,Z) | 38.4" x 22.6" x 11.6" |
| Granite Base Table | N/A |
| Maximum Workpiece Weight | 3,400 lbs. |
| Automatic Wire Thread System | Standard |
| Wire Diameter | 0.004" - 0.014" |
| Wire Feed Rate | 0 - 590 IPM |
| Wire Tension | 300 - 2,200 grams |
| Start Hole Size | .020" |
| Maximum Wire Spool Weight | 35 lbs. (opt. 100 lbs.) |
| Heidenhain Linear Glass Scales .000004" Resolution | Standard |
| Positioning Accuracy | +/- .0001" |
| Machine Weight | 7,725 lbs. |
| Dielectric Tank | |
| Tank Capacity | 235 gallons |
| Paper Filter (Cartridge Type) (Quantity) | 3 |
| Deionized (Resin Tank) 1 Cubic Feet | Standard |
| Cooling Unit (Chiller) | Standard |
| Power Supply | |
| Discharge Power Circuit | AC MOSFET Standard |
| Application Specific Integrated Circuit | ASIC Standard |
| Anti-Electrolysis Power Supply | Standard |
| Intelligent OV Circuit | Standard |
| Modular PC Board Design | Standard |
| SD Master | Standard |
| Micro Sparking Technology (MST II) | Standard |
| Input Power Supply | |
| V | 220 V +/- 5%, 3 Phase, 60 HZ |
| KVA | 20 |
| CNC Control | |
| Control Device | 64 - Bit Windows CE Based IPC |
| Screen Display | 15" Color TFT Touch Screen |
| Memory Capacity | 128 MB SD RAM |
| Controlled Axis | |
| Standard | X, Y, Z, U, V (5 Axis Simultaneous) |
| Optional | 6th Axis Simultaneous: X, Y, Z, U, V, Plus W Axis |
| Least Input Increment | 0.000004" |
| Least Command Increment | 0.000004" |
| Input/Output Interface | Keyboard, RS-232c, Ethernet, USB Ports (2) |
| Servo Control System | Full-Closed Loop |
| Interpolation | Linear, Circular |
| Maximum Programmable Dimension | ± 999.99999" |
| Command Unit | Inch/Metric Switchable |
| Scaling | 0 to 9.9999 times |
| Figure Rotation | ± 360° |
| Mirror Image | Independent X and Y Axis |
| Wire Diameter Compensation | 0 - ± 9.99999" |
| Automatic Coordinate System Skewing Calculation | |
| *Specifications subject to change without notice | |
SP-600i
| SP-600i: Specifications | |
| Table Travel (X & Y Axis) | 23.6" x 15.8" |
| Z Axis Travel | 15.8" |
| U & V Axis Travel | 3.9" x 3.9" |
| Table Feed Rate | 0 - 51.1 IPM |
| Maximum Taper Angle | |
| Standard AWT | ± 23° |
| Optional | ± 45° |
| Maximum Workpiece Size (X,Y,Z) | 39.1" x 24.4" x 15.6" |
| Granite Base Table | N/A |
| Maximum Workpiece Weight | 3,800 lbs. |
| Automatic Wire Thread System | Standard |
| Wire Diameter | 0.004" - 0.014" |
| Wire Feed Rate | 0 - 590 IPM |
| Wire Tension | 300 - 2,200 grams |
| Start Hole Size | .020" |
| Maximum Wire Spool Weight | 35 lbs. (opt. 100 lbs.) |
| Heidenhain Linear Glass Scales .000004" Resolution | Standard |
| Positioning Accuracy | +/- .0001" |
| Machine Weight | 8,160 lbs. |
| Dielectric Tank | |
| Tank Capacity | 290 gallons |
| Paper Filter (Cartridge Type) (Quantity) | 3 |
| Deionized (Resin Tank) 1 Cubic Feet | Standard |
| Cooling Unit (Chiller) | Standard |
| Power Supply | |
| Discharge Power Circuit | AC MOSFET Standard |
| Application Specific Integrated Circuit | ASIC Standard |
| Anti-Electrolysis Power Supply | Standard |
| Intelligent OV Circuit | Standard |
| Modular PC Board Design | Standard |
| SD Master | Standard |
| Micro Sparking Technology | MST II Optional |
| Input Power Supply | |
| V | 220 V +/- 5%, 3 Phase, 60 HZ |
| KVA | 20 |
| CNC Control | |
| Control Device | 64 - Bit Windows CE Based IPC |
| Screen Display | 15" Color TFT Touch Screen |
| Memory Capacity | 128 MB SD RAM |
| Controlled Axis | |
| Standard | X, Y, Z, U, V (5 Axis Simultaneous) |
| Optional | 6th Axis Simultaneous: X, Y, Z, U, V, Plus W Axis |
| Least Input Increment | 0.000004" |
| Least Command Increment | 0.000004" |
| Input/Output Interface | Keyboard, RS-232c, Ethernet, USB Ports (2) |
| Servo Control System | Full-Closed Loop |
| Interpolation | Linear, Circular |
| Maximum Programmable Dimension | ± 999.99999" |
| Command Unit | Inch/Metric Switchable |
| Scaling | 0 to 9.9999 times |
| Figure Rotation | ± 360° |
| Mirror Image | Independent X and Y Axis |
| Wire Diameter Compensation | 0 - ± 9.99999" |
| Automatic Coordinate System Skewing Calculation | |
| *Specifications subject to change without notice | |
SP-750i
| SP-750i: Specifications | |
| Table Travel (X & Y Axis) | 29.5" x 19.7" |
| Z Axis Travel | 15.8" |
| U & V Axis Travel | 3.9" x 3.9" |
| Table Feed Rate | 0 - 51.1 IPM |
| Maximum Taper Angle | |
| Standard AWT | ± 23° |
| Optional | ± 45° |
| Maximum Workpiece Size (X,Y,Z) | 46.8" x 28.3" x 11.6" |
| Granite Base Table | N/A |
| Maximum Workpiece Weight | 3,800 lbs. |
| Automatic Wire Thread System | Standard |
| Wire Diameter | 0.004" - 0.014" |
| Wire Feed Rate | 0 - 590 IPM |
| Wire Tension | 300 - 2,200 grams |
| Start Hole Size | .020" |
| Maximum Wire Spool Weight | 35 lbs. (opt. 100 lbs.) |
| Heidenhain Linear Glass Scales .000004" Resolution | Standard |
| Positioning Accuracy | +/- .0001" |
| Machine Weight | 9,460 lbs. |
| Dielectric Tank | |
| Tank Capacity | 325 gallons |
| Paper Filter (Cartridge Type) (Quantity) | 3 |
| Deionized (Resin Tank) 1 Cubic Feet | Standard |
| Cooling Unit (Chiller) | Standard |
| Power Supply | |
| Discharge Power Circuit | AC MOSFET Standard |
| Application Specific Integrated Circuit | ASIC Standard |
| Anti-Electrolysis Power Supply | Standard |
| Intelligent OV Circuit | Standard |
| Modular PC Board Design | Standard |
| SD Master | Standard |
| Micro Sparking Technology | MST II Optional |
| Input Power Supply | |
| V | 220 V +/- 5%, 3 Phase, 60 HZ |
| KVA | 20 |
| CNC Control | |
| Control Device | 64 - Bit Windows CE Based IPC |
| Screen Display | 15" Color TFT Touch Screen |
| Memory Capacity | 64 MB SD RAM |
| Controlled Axis | |
| Standard | X, Y, Z, U, V (5 Axis Simultaneous) |
| Optional | 6th Axis Simultaneous: X, Y, Z, U, V, Plus W Axis |
| Least Input Increment | 0.000004" |
| Least Command Increment | 0.000004" |
| Input/Output Interface | Keyboard, RS-232c, Ethernet, USB Ports (2) |
| Servo Control System | Full-Closed Loop |
| Interpolation | Linear, Circular |
| Maximum Programmable Dimension | ± 999.99999" |
| Command Unit | Inch/Metric Switchable |
| Scaling | 0 to 9.9999 times |
| Figure Rotation | ± 360° |
| Mirror Image | Independent X and Y Axis |
| Wire Diameter Compensation | 0 - ± 9.99999" |
| Automatic Coordinate System Skewing Calculation | |
| *Specifications subject to change without notice | |
AU Series (Non-Submersed Models - Flush Type)
AU-9i
| AU-9i: Specifications | |
| Table Travel (X & Y Axis) | 35.5" x 19.7" |
| Z Axis Travel | 11.8" |
| U & V Axis Travel | 3.9" x 3.9" |
| Table Feed Rate | 0 - 51.1 IPM |
| Maximum Taper Angle | |
| Standard AWT | ± 23° |
| Optional | ± 45° |
| Maximum Workpiece Size (X,Y,Z) | 54.2" x 29.9" x 11.6" |
| Granite Base Table | N/A |
| Maximum Workpiece Weight | 3,000 lbs. |
| Automatic Wire Thread System | Standard |
| Wire Diameter | 0.004" - 0.014" |
| Wire Feed Rate | 0 - 590 IPM |
| Wire Tension | 300 - 2,200 grams |
| Start Hole Size | .020" |
| Maximum Wire Spool Weight | 35 lbs. (opt. 100 lbs.) |
| Heidenhain Linear Glass Scales .000004" Resolution | Standard |
| Positioning Accuracy | +/- .0001" |
| Machine Weight | 11,880 lbs. |
| Dielectric Tank | |
| Tank Capacity | 100 gallons |
| Paper Filter (Cartridge Type) (Quantity) | 3 |
| Deionized (Resin Tank) 1 Cubic Feet | Standard |
| Cooling Unit (Chiller) | Standard |
| Power Supply | |
| Discharge Power Circuit | AC MOSFET Standard |
| Application Specific Integrated Circuit | ASIC Standard |
| Anti-Electrolysis Power Supply | Standard |
| Intelligent OV Circuit | Standard |
| Modular PC Board Design | Standard |
| SD Master | Standard |
| Micro Sparking Technology | MST II Optional |
| Input Power Supply | |
| V | 220 V +/- 5%, 3 Phase, 60 HZ |
| KVA | 20 |
| CNC Control | |
| Control Device | 64 - Bit Windows CE Based IPC |
| Screen Display | 15" Color TFT Touch Screen |
| Memory Capacity | 128 MB SD RAM |
| Controlled Axis | |
| Standard | X, Y, Z, U, V (5 Axis Simultaneous) |
| Optional | 6th Axis Simultaneous: X, Y, Z, U, V, Plus W Axis |
| Least Input Increment | 0.000004" |
| Least Command Increment | 0.000004" |
| Input/Output Interface | Keyboard, RS-232c, Ethernet, USB Ports (2) |
| Servo Control System | Full-Closed Loop |
| Interpolation | Linear, Circular |
| Maximum Programmable Dimension | ± 999.99999" |
| Command Unit | Inch/Metric Switchable |
| Scaling | 0 to 9.9999 times |
| Figure Rotation | ± 360° |
| Mirror Image | Independent X and Y Axis |
| Wire Diameter Compensation | 0 - ± 9.99999" |
| Automatic Coordinate System Skewing Calculation | |
| *Specifications subject to change without notice | |
AX Series (Submersed Models with Fixed Tables/Traveling Columns)
AX-8060
| AX-8060: Specifications | |
| Table Travel (X & Y Axis) | 31.5" x 23.6" |
| Z Axis Travel | 23.6" |
| U & V Axis Travel | 5.9" x 5.9" |
| Table Feed Rate | 0 - 51.1 IPM |
| Maximum Taper Angle | |
| Standard AWT | ± 23° |
| Optional | ± 45° |
| Maximum Workpiece Size (X,Y,Z) | 52.4" x 35.4" x 23.4" |
| Maximum Workpiece Weight | 8,800 lbs. |
| Automatic Wire Thread System | Standard |
| Wire Diameter | 0.008" - 0.014" |
| Wire Feed Rate | 0 - 590 IPM |
| Wire Tension | 300 - 2,200 grams |
| Start Hole Size | .020" |
| Maximum Wire Spool Weight | 35 lbs. (opt. 100 lbs.) |
| Heidenhain Linear Glass Scales .000004" Resolution | Standard |
| Positioning Accuracy | +/- .0001" |
| Machine Weight | 14,300 lbs. |
| Dielectric Tank | |
| Tank Capacity | 768 gallons |
| Paper Filter (Cartridge Type) (Quantity) | 4 |
| Deionized (Resin Tank) Cubic Feet | 2 Tanks |
| Cooling Unit (Chiller) | Standard |
| Power Supply | |
| Discharge Power Circuit | AC MOSFET Standard |
| Application Specific Integrated Circuit | ASIC Standard |
| Anti-Electrolysis Power Supply | Standard |
| Intelligent OV Circuit | Standard |
| Modular PC Board Design | Standard |
| SD Master | Standard |
| Input Power Supply | |
| V | 220 V +/- 5%, 3 Phase, 60 HZ |
| KVA | 20 |
| CNC Control | |
| Control Device | 64 - Bit Windows CE Based IPC |
| Screen Display | 15" Color TFT Touch Screen |
| Memory Capacity | 128 MB SD RAM |
| Controlled Axis | |
| Standard | X, Y, Z, U, V (5 Axis Simultaneous) |
| Optional | 6th Axis Simultaneous: X, Y, Z, U, V, Plus W Axis |
| Least Input Increment | 0.000004" |
| Least Command Increment | 0.000004" |
| Input/Output Interface | Keyboard, RS-232c, Ethernet, USB Ports (2) |
| Servo Control System | Full-Closed Loop |
| Interpolation | Linear, Circular |
| Maximum Programmable Dimension | ± 999.99999" |
| Command Unit | Inch/Metric Switchable |
| Scaling | 0 to 9.9999 times |
| Figure Rotation | ± 360° |
| Mirror Image | Independent X and Y Axis |
| Wire Diameter Compensation | 0 - ± 9.99999" |
| Automatic Coordinate System Skewing Calculation | |
| *Specifications subject to change without notice | |
AX-1165
| AX-1165: Specifications | |
| Table Travel (X & Y Axis) | 43.3" x 25.6" |
| Z Axis Travel | 23.6" |
| U & V Axis Travel | 5.9" x 5.9" |
| Table Feed Rate | 0 - 51.1 IPM |
| Maximum Taper Angle | |
| Standard AWT | ± 23° |
| Optional | ± 45° |
| Maximum Workpiece Size (X,Y,Z) | 66.4" x 39.0" x 23.4" |
| Maximum Workpiece Weight | 9,000 lbs. |
| Automatic Wire Thread System | Standard |
| Wire Diameter | 0.008" - 0.014" |
| Wire Feed Rate | 0 - 590 IPM |
| Wire Tension | 300 - 2,200 grams |
| Start Hole Size | .020" |
| Maximum Wire Spool Weight | 35 lbs. (opt. 100 lbs.) |
| Heidenhain Linear Glass Scales .000004" Resolution | Standard |
| Positioning Accuracy | +/- .0001" |
| Machine Weight | 18,800 lbs. |
| Dielectric Tank | |
| Tank Capacity | 768 gallons |
| Paper Filter (Cartridge Type) (Quantity) | 4 |
| Deionized (Resin Tank) Cubic Feet | 2 Tanks |
| Cooling Unit (Chiller) | Standard |
| Power Supply | |
| Discharge Power Circuit | AC MOSFET Standard |
| Application Specific Integrated Circuit | ASIC Standard |
| Anti-Electrolysis Power Supply | Standard |
| Intelligent OV Circuit | Standard |
| Modular PC Board Design | Standard |
| SD Master | Standard |
| Input Power Supply | |
| V | 220 V +/- 5%, 3 Phase, 60 HZ |
| KVA | 20 |
| CNC Control | |
| Control Device | 64 - Bit Windows CE Based IPC |
| Screen Display | 15" Color TFT Touch Screen |
| Memory Capacity | 128 MB SD RAM |
| Controlled Axis | |
| Standard | X, Y, Z, U, V (5 Axis Simultaneous) |
| Optional | 6th Axis Simultaneous: X, Y, Z, U, V, Plus W Axis |
| Least Input Increment | 0.000004" |
| Least Command Increment | 0.000004" |
| Input/Output Interface | Keyboard, RS-232c, Ethernet, USB Ports (2) |
| Servo Control System | Full-Closed Loop |
| Interpolation | Linear, Circular |
| Maximum Programmable Dimension | ± 999.99999" |
| Command Unit | Inch/Metric Switchable |
| Scaling | 0 to 9.9999 times |
| Figure Rotation | ± 360° |
| Mirror Image | Independent X and Y Axis |
| Wire Diameter Compensation | 0 - ± 9.99999" |
| Automatic Coordinate System Skewing Calculation | |
| *Specifications subject to change without notice | |
EZ Series (Submersed Models)
EZ-53SA
| EZ-53SA: Specifications | |
| Table Travel (X & Y Axis) | 19.7" x 11.8" |
| Z Axis Travel | 7.1" |
| Wire Feed Rate | 0 - 51.1 IPM |
| Automatic Wire Threading | Standard |
| Maximum Workpiece Size (X,Y,Z) | 32.7" x 27.6" x 6.9" |
| Maximum Workpiece Weight | 990 lbs. |
| Automatic Wire Thread System | Standard |
| Wire Diameter | 0.004" - 0.012" |
| Wire Tension | 300-2,200 G |
| Start Hole Size | .020" |
| Maximum Wire Spool Weight | 22 lbs. |
| Heidenhain Linear Glass Scales .000004" Resolution | |
| Positioning Accuracy | +/- .0001" |
| Floor Space | 99" x 95" x 87" |
| Machine Weight | 6,160 lbs. |
| Dielectric Tank | |
| Tank Capacity | 224 gallons |
| Paper Filter (Cartridge Type) (Quantity) | 2 |
| Deionized (Resin Tank) 1 Cubic Feet | Standard |
| Cooling Unit (Chiller) | Standard |
| Power Supply | |
| Discharge Power Circuit | AC MOSFET Standard |
| Application Specific Integrated Circuit | ASIC Standard |
| Anti-Electrolysis Power Supply | Standard |
| Intelligent OV Circuit | Standard |
| Modular PC Board Design | Standard |
| SD Master | Standard |
| Input Power Supply | |
| V | 220 V +/- 5%, 3 Phase, 60 HZ |
| KVA | 20 |
| CNC Control | |
| Control Device | 64 - Bit Windows CE Based IPC |
| Screen Display | 15" Color TFT Touch Screen |
| Memory Capacity | 128 MB SD RAM |
| Controlled Axis | |
| Standard | X, Y, Z |
| Least Input Increment | 0.000004" |
| Least Command Increment | 0.000004" |
| Input/Output Interface | Keyboard, RS-232c, Ethernet, USB Ports (1) |
| Servo Control System | Full-Closed Loop |
| Interpolation | Linear, Circular |
| Maximum Programmable Dimension | ± 999.99999" |
| Command Unit | Inch/Metric Switchable |
| Scaling | 0 to 9.9999 times |
| Figure Rotation | ± 360° |
| Mirror Image | Independent X and Y Axis |
| Wire Diameter Compensation | 0 - ± 9.99999" |
| Automatic Coordinate System Skewing Calculation | |
| *Specifications subject to change without notice | |
Small Hole EDM - CNC Small Hole EDM Series
HP-350 CNC
| HP-350 CNC: Specifications | |
| X, Y Axis Travel | 13.8" x 11.8" |
| Z Axis Travel | 7.9" |
| W Axis Travel | 13.5" |
| Controlled Axis | X, Y, Z, W Axis |
| Stainless Steel Table | 23.6" x 11.8" |
| Work Tank | 42" x 21" x 8.6" |
| Maximum Distance Between Guide/Worktable | 14" |
| Electrode Diameter | .004 - .118 Standard Chuck or .004" - .250" with ER Collet Option |
| Electrode Material | Brass/Copper |
| Submersible Tank | Yes |
| Optional Automatic Electrode Changer (AEC) | Choice of 10 or 16 position Electrode Tubes (optional) |
| Optional Automatic Guide Changer (AGC) | 5 Guides (optional) |
| Maximum Workpiece Weight and Size |
770 lbs. 39" x 19" x 11" |
| Machine Weight | 2,200 lbs. |
| Machine Dimensions (LxHxW) | 86" x 56" x 91" |
| Power Supply | |
| Maximum Machining Current | 50 Amp |
| Maximum Power Consumption | 4.5 KVA |
| Power Input | 220 / 380 / 415 / 440 V + 5%, 3 Phase, 60 HZ |
| Dielectric System | |
| Flush Pump | Standard 1/4 HP |
| Fill Pump | Standard 1 HP |
| Tank (dirty & clean) | Standard 68 gallons |
| Filter | Cartridge (10 Micron) |
| 98 Bar |
Max. PSI Rating |
| Tank (Dirty & Clean) |
Standard 20 Gallon |
| *Specifications subject to change without notice | |
HP-450 CNC
| HP-450 CNC: Specifications | |
| X, Y Axis Travel | 17.7" x 13.8" |
| Z Axis Travel | 7.9" |
| W Axis Travel | 13.5" |
| Controlled Axis | X, Y, Z, W Axis |
| Stainless Steelk Table | 23.6" x 11.8" |
| Work Tank | 45" x 24" x 8.6" |
| Maximum Distance Between Guide/Worktable | 14" |
| Electrode Diameter | .004 - .118 Standard Chuck or .004" - .250" with ER Collet Option |
| Electrode Material | Brass/Copper |
| Submersible Tank | N/A |
| Optional Automatic Electrode Changer (AEC) | Choice of 10 or 16 position Electrode Tubes (optional) |
| Optional Automatic Guide Changer (AGC) | 5 Guides (Optional) |
| Maximum Workpiece Weight and Size |
1210 lbs. 42" x 22" x 11" |
| Machine Weight | 2970 lbs. |
| Machine Dimensions (LxHxW) | 110" x 63" x 95" |
| Power Supply | |
| Maximum Machining Current | 50 Amp |
| Maximum Power Consumption | 4.5 KVA |
| Power Input | 220 / 380 / 415 / 440 V + 5%, 3 Phase, 60 HZ |
| Dielectric System | |
| Flush Pump | Standard 1/4 HP |
| Fill Pump | Standard 1 HP |
| Tank (dirty & clean) | Standard 20 Gallons |
| Filter | Cartridge (10 Micron) |
| 98 Bar | Max. PSI Rating |
| *Specifications subject to change without notice | |
HP-600 CNC
| HP-600 CNC: Specifications | |
| X, Y Axis Travel | 23.6" x 15.7" |
| Z Axis Travel | 9.8" |
| W Axis Travel | 13.5" |
| Controlled Axis | X, Y, Z, W Axis |
| Stainless Steel Table | 31.5" x 17.7" |
| Work Tank | 50" x 27" x 8.6" |
| Maximum Distance Between Guide/Worktable | 1.8" - 18.0" |
| Electrode Diameter | .004" - .118" Standard Chuck or .004" - .250" with ER Collet Option |
| Electrode Material | Brass/Copper |
| Optional Automatic Electrode Changer (AEC) | Choice of 10 or 16 Position Electrode Tubes |
| Optional Automatic Guide Changer (AGC) | 5 Guides |
| Maximum Workpiece Weight and Size |
1540 lbs. 46" x 30" x 16" |
| Machine Weight | 4,290 lbs. |
| Machine Dimensions (LxHxW) | 149" x 71" x 103" |
| Power Supply | |
| Maximum Machining Current | 50 Amp |
| Maximum Power Consumption | 4.5 KVA |
| Power Input | 220 / 380 / 415 / 440 V + 5%, 3 Phase, 60 HZ |
| Dielectric System | |
| Flush Pump | Standard 1/4 HP |
| Fill Pump | Standard 1 HP |
| Tank (dirty & clean) | Standard 20 Gallons |
| Filter | Cartridge (10 Micron) |
| 98 Bar |
Max. PSI Rating |
| *Specifications subject to change without notice | |
Manual Small Hole EDM Series
HP-350 ZNC
| HP-350 ZNC: Specifications | |
| X, Y Axis Travel | 13.8" x 11.8" |
| Z Axis Travel (Column Movement) |
7.9" |
| U Axis Travel (Hand Crank - Electrode Guide) |
5.9" |
| W Axis Travel (Spindle Servo Travel) | 13.5" |
| Electrode Diameter | .004" - .118" Standard Diameter or .004" - .250" with ER Collet Option |
| Electrode Material | Brass / Copper |
| Machine Weight | 2,200 lbs. |
| Machine Dimensions (D x W x H) |
86" x 56" x 91" |
| Maximum Workpiece Size |
39" x 19" x 11" |
| Maximum Workpiece Weight | 770 lbs. |
| Power Supply | |
| Maximum Machining Current | 50 Amps |
| Power Capacity | 4.5 KVA |
| Power Input | 220 / 380 / 415 / 440 V +/- 5%, 3 Phase, 60 HZ |
| Dielectric System | |
| Dielectric Volume | 20 Gallons |
| Flush Pump | Standard |
| Filter Pump | Standard |
| Tank (Dirty and Clean) | Standard with 2 containers |
| Filter | Cartridge (2 Micron) |
| *Specifications subject to change without notice | |
HP-400 ZNC
| HP-400 ZNC: Specifications | |
| X, Y Axis Travel | 15.7" x 11.8" |
| Z Axis Travel (Column Movement) |
7.9" |
| U Axis Travel (Hand Crank - Electrode Guide) |
5.9" |
| W Axis Travel (Spindle Servo Travel) | 13.5" |
| Electrode Diameter | .004" - .118" Standard Diameter or .004" - .250" with ER Collet Option |
| Electrode Material | Brass / Copper |
| Machine Weight | 2,640 lbs. |
| Machine Dimensions (D x W x H) |
94" x 60" x 91" |
| Maximum Workpiece Size |
42" x 22" x 11" |
| Maximum Workpiece Weight | 770 lbs. |
| Power Supply | |
| Maximum Machining Current | 50 Amps |
| Power Capacity | 4.5 KVA |
| Power Input | 220 / 380 / 415 / 440 V +/- 5%, 3 Phase, 60 HZ |
| Dielectric System | |
| Dielectric Volume | 20 Gallons |
| Flush Pump | Standard |
| Filter Pump | Standard |
| Tank (Dirty and Clean) | Standard |
| Filter | Cartridge (2 Micron) |
| *Specifications subject to change without notice | |
HP-450 ZNC
| HP-450 ZNC: Specifications | |
| X, Y Axis Travel | 17.7" x 13.8" |
| Z Axis Travel (Column Movement) |
7.9" |
| U Axis Travel (Hand Crank - Electrode Guide) |
5.9" |
| W Axis Travel (Spindle Servo Travel) | 13.5" |
| Electrode Diameter | .004" - .118" Standard Diameter or .004" - .250" with ER Collet Option |
| Electrode Material | Brass / Copper |
| Machine Weight | 2,970 lbs. |
| Machine Dimensions (D x W x H) |
110" x 63" x 95" |
| Maximum Workpiece Size |
42" x 22" x 11" |
| Maximum Workpiece Weight | 770 lbs. |
| Power Supply | |
| Maximum Machining Current | 50 Amps |
| Power Capacity | 4.5 KVA |
| Power Input | 220 / 380 / 415 / 440 V +/- 5%, 3 Phase, 60 HZ |
| Dielectric System | |
| Dielectric Volume | 20 Gallons |
| Flush Pump | Standard |
| Filter Pump | Standard |
| Tank (Dirty and Clean) | Standard |
| Filter | Cartridge (2 Micron) |
| *Specifications subject to change without notice | |
HP-550 ZNC
| HP-550 ZNC: Specifications | |
| X, Y Axis Travel | 21.7" x 15.7" |
| Z Axis Travel (Column Movement) |
9.8" |
| U Axis Travel (Hand Crank - Electrode Guide) |
5.9" |
| W Axis Travel (Spindle Servo Travel) | 13.5" |
| Electrode Diameter | .004" - .118" Standard Diameter or .004" - .250" with ER Collet Option |
| Electrode Material | Brass / Copper |
| Machine Weight | 4,290 lbs. |
| Machine Dimensions (D x W x H) |
133" x 71" x 95" |
| Maximum Workpiece Size |
46" x 30" x 16" |
| Maximum Workpiece Weight | 1540 lbs. |
| Power Supply | |
| Maximum Machining Current | 50 Amps |
| Power Capacity | 4.5 KVA |
| Power Input | 220 / 380 / 415 / 440 V +/- 5%, 3 Phase, 60 HZ |
| Dielectric System | |
| Dielectric Volume | 20 Gallons |
| Flush Pump | Standard |
| Filter Pump | Standard |
| Tank (Dirty and Clean) | Standard |
| Filter | Cartridge (2 Micron) |
| *Specifications subject to change without notice | |
HP-600 ZNC
| HP-600 ZNC: Specifications | |
| X, Y Axis Travel | 23.6" x 15.7" |
| Z Axis Travel (Column Movement) |
9.8" |
| U Axis Travel (Hand Crank - Electrode Guide) |
5.9" |
| W Axis Travel (Spindle Servo Travel) | 13.5" |
| Electrode Diameter | .004" - .118" Standard Diameter or .004" - .250" with ER Collet Option |
| Electrode Material | Brass / Copper |
| Machine Weight | 4,620 lbs. |
| Machine Dimensions (D x W x H) |
149" x 71" x 103" |
| Maximum Workpiece Size |
48" x 25" x 16" |
| Maximum Workpiece Weight | 1,540 lbs. |
| Power Supply | |
| Maximum Machining Current | 50 Amps |
| Power Capacity | 4.5 KVA |
| Power Input | 220 / 380 / 415 / 440 V +/- 5%, 3 Phase, 60 HZ |
| Dielectric System | |
| Dielectric Volume | 20 Gallons |
| Flush Pump | Standard |
| Filter Pump | Standard |
| Tank (Dirty and Clean) | Standard |
| Filter | Cartridge (2 Micron) |
| *Specifications subject to change without notice | |
HP-755 ZNC
| HP-755 ZNC: Specifications | |
| X, Y Axis Travel | 29.5" x 21.7" |
| Z Axis Travel (Column Movement) |
14.6" |
| U Axis Travel (Hand Crank - Electrode Guide) |
5.9" |
| W Axis Travel (Spindle Servo Travel) | 13.5" |
| Electrode Diameter | .004" - .118" Standard Diameter or .004" - .250" with ER Collet Option |
| Electrode Material | Brass / Copper |
| Machine Weight | 6490 lbs. |
| Machine Dimensions (D x W x H) |
154" x 79" x 111" |
| Maximum Workpiece Size |
66" x 31" x 22" |
| Maximum Workpiece Weight | 2,200 lbs. |
| Power Supply | |
| Maximum Machining Current | 50 Amps |
| Power Capacity | 4.5 KVA |
| Power Input | 220 / 380 / 415 / 440 V +/- 5%, 3 Phase, 60 HZ |
| Dielectric System | |
| Dielectric Volume | 20 Gallons |
| Flush Pump | Standard |
| Filter Pump | Standard |
| Tank (Dirty and Clean) | Standard |
| Filter | Cartridge (2 Micron) |
| *Specifications subject to change without notice | |
Die Sinker EDM
CNC Die Sinkers (CM Series)
DS-430S CM
| DS-430S CM: Specifications | |
| X, Y Axis Travel | 16" x 12" |
| Z Axis Travel |
12" |
| Work Table Size |
26" x 14" |
| Maximum Workpiece Size |
38" x 22" x 14" |
| Maximum Workpiece Weight |
1,210 lbs. |
| Maximum Electrode Weight |
Platen - 265 lbs. C-Axis - 55 lbs. |
| Distance from RAM to Table |
11" - 22" |
| Axis Drive Motor |
AC Servo Motor Coupled to Ballscrews |
| Floor Space |
97" x 71" x 93" |
| Machine Weight |
3,400 lbs. |
| Power Supply | |
| Power Supply | 60 |
| Maximum Machining Current |
60 AMPs |
| Power Source Requirement |
220 V + 5%, 3 Phase, 60 HZ |
| Power Input | 4.5 KVA |
| Minimum Electrode Ware Rate | 0 - 0.15% |
| Best Surface Finish | < 0.18 RA UM |
| Dielectric System | |
| Tank Capacity (Built in) |
99 Gallons |
| Filtration | 2 Each Paper |
| Grundfos Pumps |
Standard |
| Flushing Nozzles |
4 |
| *Specifications subject to change without notice | |
DS-550 CM
| DS-550 CM: Specifications | |
| X, Y Axis Travel | 20" x 16" |
| Z Axis Travel |
14" |
| Work Table Size |
32" x 18" |
| Maximum Workpiece Size |
47" x 27" x 17" |
| Maximum Workpiece Weight |
2,970 lbs. |
| Maximum Electrode Weight |
Platen - 484 lbs. C-Axis - 55 lbs. |
| Distance from RAM to Table |
11" - 26" |
| Axis Drive Motor |
AC Servo Motor Coupled to Ballscrews |
| Floor Space |
53" x 65" x 93" |
| Machine Weight |
4,300 lbs. |
| Power Supply | |
| Power Supply | 60 |
| Maximum Machining Current |
60 AMPs |
| Power Source Requirement |
220 V + 5%, 3 Phase, 60 HZ |
| Power Input | 4.5 KVA |
| Minimum Electrode Ware Rate | 0 - 0.15% |
| Best Surface Finish | < 0.18 RA UM |
| Dielectric System | |
| Tank Capacity (Built in) |
145 Gallons |
| Filtration | 2 Each Paper |
| Grundfos Pumps |
Standard |
| Flushing Nozzles |
4 |
| *Specifications subject to change without notice | |
DS-1060 CM
| DS-1060 CM: Specifications | |
| X, Y Axis Travel | 39" x 24" |
| Z Axis Travel |
20" |
| Work Table Size |
49" x 30" |
| Maximum Workpiece Size |
75" x 43" x 24" |
| Maximum Workpiece Weight |
9,900 lbs. |
| Maximum Electrode Weight |
Platen - 770 lbs. C-Axis - 55 lbs. |
| Distance from RAM to Table |
17" - 36" |
| Axis Drive Motor |
AC Servo Motor Coupled to Ballscrews |
| Floor Space |
172" x 131" x 126" |
| Machine Weight |
13,900 lbs. |
| Power Supply | |
| Power Supply | 120 |
| Maximum Machining Current |
120 AMPs |
| Power Source Requirement |
220 V + 5%, 3 Phase, 60 HZ |
| Power Input | 16 KVA |
| Minimum Electrode Ware Rate | 0 - 0.4% |
| Best Surface Finish | < 0.18 RA UM |
| Dielectric System | |
| Tank Capacity (Built in) |
145 Gallons |
| Filtration | 2 Each Paper |
| Grundfos Pumps |
Standard |
| Flushing Nozzles |
4 |
| *Specifications subject to change without notice | |
