GSM


Semi-Guarding Products

GSM-800S


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-800
TABLE
Worktable mm/inch 355x1270/14"x50"
T-slot mm 16 x 3 x 64
Table load capacity kgs 500
MOVEMENT
X axis travel m/m 800
Y axis travel m/m 400
Z axis Travel m/m 450
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø32
Rapid travel m/min 0-10
MOTORS
Spindle motor HP 7.5
Tool storage capacity   (16)
N.W. kgs 2700
G.W. kgs 3000
Packing measurement cm 210x226x240

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-1000S


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1000
TABLE
Worktable mm/inch 406x1372/16"x54"
T-slot mm 16 x 3 x 64
Table load capacity kgs 600
MOVEMENT
X axis travel m/m 1000
Y axis travel m/m 500
Z axis Travel m/m 520 (600)
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø32
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 10
Tool storage capacity   (16)
N.W. kgs 2900
G.W. kgs 3200
Packing measurement cm 195x226x250

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-1300S


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1300
TABLE
Worktable mm/inch 420x1600/16.5"x63"
T-slot mm 16 x 5 x 60
Table load capacity kgs 800
MOVEMENT
X axis travel m/m 1300
Y axis travel m/m 635
Z axis Travel m/m 620
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 10
Tool storage capacity   (16;20)
N.W. kgs 3600
G.W. kgs 4000
Packing measurement cm 250x226x254

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-1500S


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1500
TABLE
Worktable mm/inch 450x1800/17"x70"
T-slot mm 16 x 5 x 60
Table load capacity kgs 1000
MOVEMENT
X axis travel m/m 1500
Y axis travel m/m 650
Z axis Travel m/m 620
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 10 (15)
Tool storage capacity   (20:24)
N.W. kgs 4000
G.W. kgs 4300
Packing measurement cm 252x226x254

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-1500LS


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1500L
TABLE
Worktable mm/inch 610x1854/24"x73"
T-slot mm 18 x 5 x 70
Table load capacity kgs 1500
MOVEMENT
X axis travel m/m 1500
Y axis travel m/m 850
Z axis Travel m/m 710
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 15
Tool storage capacity   (20:24)
N.W. kgs 4800
G.W. kgs 5200
Packing measurement cm 315x226x254

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-1700S


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1700
TABLE
Worktable mm/inch 762x1830/30"x72"
T-slot mm 18 x 5 x 100
Table load capacity kgs 1500
MOVEMENT
X axis travel m/m 1700
Y axis travel m/m 850
Z axis Travel m/m 710
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 15 (20)
Tool storage capacity   (20:24)
N.W. kgs 6400
G.W. kgs 6800
Packing measurement cm 342x226x254

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-2000S


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-2000
TABLE
Worktable mm/inch 813x2185/32"x86"
T-slot mm 18 x 5 x 100
Table load capacity kgs 1800
MOVEMENT
X axis travel m/m 2000
Y axis travel m/m 850
Z axis Travel m/m 710
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 15 (20)
Tool storage capacity   (20:24)
N.W. kgs 6800
G.W. kgs 7200
Packing measurement cm 342x226x254

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-2500S


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-2500
TABLE
Worktable mm/inch 813x2750/32"x108"
T-slot mm 18 x 5 x 125
Table load capacity kgs 2000
MOVEMENT
X axis travel m/m 2500
Y axis travel m/m 850
Z axis Travel m/m 710
SPINDLE HEAD
Spindle taper   BT-40 (CAT-50 DIN40)
Spindle speed rpm 6000
Feed Rate m/min 0-10
Ballscrew diameter m/min Ø50
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 20
Tool storage capacity   (20;24)
N.W. kgs 9500
G.W. kgs 10000
Packing measurement cm 323x228x254
270x226x100

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-3000S


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-3000
TABLE
Worktable mm/inch 813x3200/32"x126"
T-slot mm 18 x 7 x 100
Table load capacity kgs 2200
MOVEMENT
X axis travel m/m 3000
Y axis travel m/m 900
Z axis Travel m/m 750
SPINDLE HEAD
Spindle taper   BT-50 (CAT-50)
Spindle speed rpm 4500
Feed Rate m/min 0-10
Ballscrew diameter m/min Ø80 (Ø63)
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 20
Tool storage capacity   (20;24)
N.W. kgs 14600/1100/800
G.W. kgs 15000/1500/1000
Packing measurement cm 610x228x254
240x226x150
180x226x110

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (20T, 24T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 6000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms
  • GSM-3000 GEAR-HEAD

Full-Guarding Products

GSM-800F


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-800
TABLE
Worktable mm/inch 355x1270/14"x50"
T-slot mm 16 x 3 x 64
Table load capacity kgs 500
MOVEMENT
X axis travel m/m 800
Y axis travel m/m 400
Z axis Travel m/m 450
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø32
Rapid travel m/min 0-10
MOTORS
Spindle motor HP 7.5
Tool storage capacity   (16)
N.W. kgs 2800
G.W. kgs 3100
Packing measurement cm 310x228x240

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-1000F


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1000
TABLE
Worktable mm/inch 406x1372/16"x54"
T-slot mm 16 x 3 x 64
Table load capacity kgs 600
MOVEMENT
X axis travel m/m 1000
Y axis travel m/m 500
Z axis Travel m/m 520 (600)
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø32
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 10
Tool storage capacity   (16)
N.W. kgs 3000
G.W. kgs 3300
Packing measurement cm 330x226x250

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-1300F


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1300
TABLE
Worktable mm/inch 420x1600/16.5"x63"
T-slot mm 16 x 5 x 60
Table load capacity kgs 800
MOVEMENT
X axis travel m/m 1300
Y axis travel m/m 635
Z axis Travel m/m 620
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 10
Tool storage capacity   (16;20)
N.W. kgs 3800/800
G.W. kgs 4200/1000
Packing measurement cm 330x226x254
110x226x200

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-1500F


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1500
TABLE
Worktable mm/inch 450x1800/17"x70"
T-slot mm 16 x 5 x 60
Table load capacity kgs 1000
MOVEMENT
X axis travel m/m 1500
Y axis travel m/m 650
Z axis Travel m/m 620
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 10 (15)
Tool storage capacity   (20:24)
N.W. kgs 4200/1000
G.W. kgs 4500/1100
Packing measurement cm 330x226x254
175x226x200

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-1500LF


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1500L
TABLE
Worktable mm/inch 610x1854/24"x73"
T-slot mm 18 x 5 x 70
Table load capacity kgs 1500
MOVEMENT
X axis travel m/m 1500
Y axis travel m/m 850
Z axis Travel m/m 710
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 15
Tool storage capacity   (20:24)
N.W. kgs 5000/1100
G.W. kgs 5400/1200
Packing measurement cm 382x226x254
240x226x200

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-1700F


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1700
TABLE
Worktable mm/inch 762x1830/30"x72"
T-slot mm 18 x 5 x 100
Table load capacity kgs 1500
MOVEMENT
X axis travel m/m 1700
Y axis travel m/m 850
Z axis Travel m/m 710
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 15 (20)
Tool storage capacity   (20:24)
N.W. kgs 6600/1000/800
G.W. kgs 7000/1100/1000
Packing measurement cm 372x226x254
220x226x200
180x226x200

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-2000F


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-2000
TABLE
Worktable mm/inch 813x2185/32"x86"
T-slot mm 18 x 5 x 100
Table load capacity kgs 1800
MOVEMENT
X axis travel m/m 2000
Y axis travel m/m 850
Z axis Travel m/m 710
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 15 (20)
Tool storage capacity   (20:24)
N.W. kgs 6900/1000/800
G.W. kgs 7300/1100/1000
Packing measurement cm 372x228x254
240x226x200
180x220x200

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-2500F


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-2500
TABLE
Worktable mm/inch 813x2750/32"x108"
T-slot mm 18 x 5 x 125
Table load capacity kgs 2000
MOVEMENT
X axis travel m/m 2500
Y axis travel m/m 850
Z axis Travel m/m 710
SPINDLE HEAD
Spindle taper   BT-40 (CAT-50 DIN40)
Spindle speed rpm 6000
Feed Rate m/min 0-10
Ballscrew diameter m/min Ø50
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 20
Tool storage capacity   (20;24)
N.W. kgs 9500/1000/800
G.W. kgs 10000/1000/1000
Packing measurement cm 382x228x254
240x226x200
180x226x200

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms

GSM-3000F


  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-3000
TABLE
Worktable mm/inch 813x3200/32"x126"
T-slot mm 18 x 7 x 100
Table load capacity kgs 2200
MOVEMENT
X axis travel m/m 3000
Y axis travel m/m 900
Z axis Travel m/m 750
SPINDLE HEAD
Spindle taper   BT-50 (CAT-50)
Spindle speed rpm 4500
Feed Rate m/min 0-10
Ballscrew diameter m/min Ø80 (Ø63)
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 20
Tool storage capacity   (20;24)
N.W. kgs 15600/1100/1100
G.W. kgs 16000/1300/1100
Packing measurement cm 610x228x254
240x226x200
320x226x100

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (20T, 24T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 6000RPM spindle
  • ZF Gear spindle.
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms
  • GSM-3000 GEAR-HEAD

Have Questions?


Call: 920.966.1236
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Our Location


2897 Witzel Ave.
Oshkosh, WI 54904

View Map

Mailing List